|
How secure is your boat or equipment right now? - Put yourself in control with a GSM alarm signalling unit from Mobilarm!
- Does your alarm just make a noise?
- Do the thieves and vandals just ignore your alarm?
- Do you rely upon others for security surveillance?
- Do you just hope that it won't be your possessions that are damaged or burgled?
- Who is most interested in your possessions? You!
Mobilarm - a new product putting you in control - Instant Alarm Text Message on your mobile phone.
- You are in control so you decide the action.
- Text the alarm from your mobile phone to operate.
- Text to switch on board equipment on and off.
- Check the boat or plant's state of readiness.
- Give your friends or colleagues controlled access.
- Check your equipment's status anytime from anywhere.
| - Compact IP66 Enclosure
- Remote Alarm
- Remote Control
- Remote Monitoring
| Overview Alarm message direct to your mobile phone. Four inputs or outputs individually programmable. Alarms programmable for 24/7 or armed operation. Optional normal after alarm message. Programmable 'Open' or 'Secure' access. Pre-payment or contract SIMs. Credit balance/alarm on pre-payment tariff. Low consumption (18mA) 12/24Volt powered unit. Customise the messages. Monitor and alarm on equipment's battery voltage. Retrieve equipment's whereabouts by Cell location. - Intruder/Vandalism Alarm - Monitor bilges - Operate bilge pump - Control auxiliary generator - Monitor battery state Features Mobilarm is compact and designed to run from a nominal 12 or 24 Volt DC supply such as a car battery or two in series. It measures approx 110mm (4 1/4") wide x 110mm (4 1/4") high by 65mm (2 1/2") deep and can be mounted to a wall by four 5mm or No6 fixing screws in the corners of the box. These are positioned on a 95mm (3 3/4") square. Using these mounting holes maintains the box sealing to the IP66 rating. 4 independent alarm inputs and/or control outputs can be preset by the user to perform a number of functions. It also monitors the supply to the unit. Please note that this model requires a SIM card and either a stub aerial or self-adhesive dipole. Please note that when using as an alarm or control system, additional sensors and interface hardware will be required.
|